References

Justizzentrum Eisenstadt The installation of the floor guiding system for the blind in the Justice Center Eisenstadt was carried out in 2013. Self-adhesive guiding strips made of polyurethane TPU/P1 were used for the installation. The guiding system is arranged according to ISOTI rules - International System Of Tactile Indicators. The varying number and arrangement of the strips in the guiding line defines the function of the guiding line or informs about the destination of the guiding path. The basic circuit consists of a 3-line, the path to the lift is a 4-line, the path to the stairs is a 5-line, the warning field in front of the stairs at the top is a transversely oriented 7-line, etc.

Assembly in the Slovenian National Museum in Ljubljana The floor guiding system for the blind in the Slovenian National Museum in Ljubljana was installed in 2015. Self-adhesive guiding strips made of polyurethane TPU/P1/35/500/3 and warning studs TPU/KH/25/3.3 were used for the tactile floor guiding system for the blind. The elements are self-adhesive, equipped with Gerband 941.

Self-adhesive installation at the Canadian Museum of Human Rights, Winnipeg The installation at the Canadian Museum of Human Rights in Winnipeg took place in 2017. White polyurethane self-adhesive guiding strips TPU/P1/35/500/3 and warning studs TPU/KH/25/3.3 were used to install the tactile floor guiding system for the blind. The elements were sticked with 3M VHB 5925 tape.

Installation of the polyurethane guiding system in Kasárne Kulturpark, Košice The installation of the floor guiding system for the blind consists of polyurethane guiding strips TPU/PH/35/295/5 and warning studs TPU/KH/25/5. Guiding strips and warning studs with pins were used - drilling installation. The purpose of the warning strip is to warn a visually impaired person before entering a dangerous area, unless the warning is provided otherwise. The signal strip indicates that an important place is nearby and leads the visually impaired to this place.

Installation of polyurethane tactile indicators in the Völklingen Ironworks Museum Self-adhesive tactile guiding strips TPU/PH/16/295/3.3 and warning studs TPU/KH/25/3.3 were used for the installation of the floor guiding system for the blind in the Völklingen Ironworks Museum. 3M VHB 5925 adhesive tape was used to stick down the elements. The floor indicators are arranged in accordance with the German standard DIN 32984 - Ground surface indicators in public areas.

Installation of polyurethane guiding strips at the Faculty of Economics, University of Vienna The installation of the floor guiding system for the blind at the Faculty of Economics, University of Vienna was carried out in 2013. Self-adhesive guiding strips made of polyurethane TPU/P1 were used, the tape was Gerband 941, ideal in interiors. The guiding system is arranged according to ISOTI rules - International System Of Tactile Indicators. The varying number and arrangement of the strips in the guiding line defines the function of the guiding line or informs about the destination of the guiding path. The basic circuit consists of a 3-line, the path to the lift is a 4-line, the path to the stairs is a 5-line, the warning field in front of the stairs at the top is a transversely oriented 7-line, etc.

Tactile floor guiding system for the blind in the Zagreb Hospital TPU/P2 guiding strips and TPU/K2 warning studs in two colors were used for the design of the tactile floor guiding system. The elements used were self-adhesive, taped with 3M 93020LE.

Tactile floor guiding systems in Unicredit Bank Austria branches The installations were carried out in 2011 in Vienna and some other towns nearby. Red polyurethane guiding strips TPU/P1-RE-S/35/500/3, self-adhesive with Gerband 941 tape were used for the installation of the floor guiding system for the blind. The guiding strips are arranged according to the ÖNORM standard.

Drilling installation of tactile indicators in Trenčianská Teplá Installation at the Trenčianska Teplá railway station took place in 2014. Polyurethane guiding strips TPU/P2/35/295/5 and warning studs TPU/K2/35/5 were used for the guiding system for the blind. Guiding strips and warning studs with pins were used - drilling installation.

Installation of polyurethane guiding strips in the Wien Mitte shopping center The installation of the floor guiding system for the blind in the shopping center Wien Mitte The Mall was carried out in 2013. Self-adhesive guiding strips made of polyurethane type TPU/P1/35/500/3 were used for the installation. The guiding system is arranged according to ISOTI rules - International System Of Tactile Indicators.

Installation of a warning and guiding system at the Tvrdošovce railway station The installation was carried out in 2013. Polyurethane guiding strips TPU/P2/35/295/5 and warning studs TPU/K2/25/5 were used for the guiding system for the blind. Guiding strips and warning studs with pins were used - drilling installation.

Installation of polyurethane warning studs at the Trnava railway station Installation at the Trnava railway station took place in 2013. The warning field in front of the stairs consists of blue polyurethane warning studs TPU/K2/35/5. The studs were drillled in the pavement.